![]() ![]() You can use our freeware utility MCGETMAC.EXE, to obtain ethernet address of the NIC (network interface card) of the target computer. This multicast packet will be delivered by router(s) to the ethernet switch that comprises the network segment. The broadcast ip address of this subnet is 192.168.5.255 – that’s what you use as the destination IP address on the packet.Įxample2: MC-WOL 00:01:02:5C:A1:B2 /a 192.168.5.255 For example you have a segment using the class C network 192.168.5.0. If a target computer is on another LAN, IP address must be specified. The password should be specified in ethernet hex format (i.e. ![]() password – Is only required for a few adapter types.This argument is not required if computers are located on the same LAN. ip-address – Multicast IP address of the LAN (see below) where the destination computer is located.ethernet-address – Ethernet MAC address of the network adapter of the destination computer.Use the following command in a Windows DOS box: In the BIOS Power Management, you must enable the LAN Wakeup option.A network card that can support WOL with its cable to the motherboard properly installed. ![]()
0 Comments
Leave a Reply. |